|
|
W Type
|
|
Spiroplan Small Geared Motors
|
 |
The W-Series single-stage Spiroplan generated motors with wear-free gearing and very smooth running. In a compact design with light aluminium housing.
Available as foot-mounted, flange-mounted, solid shaft or hollow shaft-mounted version. |
|
|
| |
|
R Type
|
|
Helical Geared Units
|
|
| The R type offers the single-stage RX series as well as the two and three-stage R type coxial design with high permissible over-hung loads. Available as foot-mounted or flange-mounted. |
|
|
| |
|
S Type
|
|
Helical-Worm Geared Units
|
|
The S type two-stage helical-worm geared units with right angle power transmission flow offer a high reduction ratio in the worm gear stage, extremely low-noise operation and high permissible overhung loads.
Available as foot-mounted, flange-mounted, solid shaft or hollow shaft-mounted versions. |
|
|
| |
|
F Type
|
|
Parallel Helical Geared Units
|
|
The F type parallel shaft helical geared units with their particularly slim design, offer high efficiency and high-endurance gearing, for mounting wherever space is restricted.
Available as foot-mounted, flange-mounted, solid shaft or hollow shaft-mounted versions. |
|
|
| |
|
K Type
|
|
Helical-Bevel Geared Units
|
|
The K type three-stage helical-bevel-helical geared units with right angle power transmission flow, have high efficiency, high endurance gearing and high permissible overhung loads.
Available as foot-mounted, flange-mounted, solid shaft or hollow shaft-mounted versions. |
|
|
| |
|
Movitrac MC07
|
|
Vector Drive for High Torque & Hoist Applications
|
|
- Sensorless vector flux control
- Simple startup and operation
- High overload capacity (up to 180% for breakaway)
- Integrated operator panel for settings, control, etc
- Dynamic braking as standard (PTC brake resistor fitted in sizes ≤ 4.0kW)
- Build-in electronic shear-pin
- Integrated PI control system for pumps, fans, etc
- Programmable digital I/O:
1 x analogue input
(0 ~ 10V / 0(4) ~ 20mA)
5 x digital inputs
2 x digital outputs
|
|
|
|
Movodrive B Series
|
|
Drive Inverters for Positioning & Sequence Control
|
|
- One inverter-suitable for a wide range of applications; For asynchronous AC drivers or synchronous servo drives
- Now covering power range from 0.55 to 160kW
- Expanded basic functions through more inputs and outputs in the drive inverter
- Modular unit concept: Optional communication and application components expand the basic function
- Integrated "safe stop" safety function according to EN 954-1, category 3
- Plug-in service module for simple and fast transfer of unit data for servicing purpose
- Keypad with full matrix display and nine selectable languages
- Jerk-limited acceleration for protecting systems prone to vibrations
- MOVITOOLS operating software for easy startup and diagnostics
- PROFIBUS, DeviceNet, ETHERNET MODBUS TCP, INTERBUS fieldbus interfaces
- Expanded IPOS positioning and sequence control system functions
|
|
|
|