Copyright © 2023 Ototrans Marketing Sdn Bhd | SEW Distributor & Festo Distributor Johor Bahru (JB), Malaysia
 
 
 
| Cancel

Authorised Dealer

Sew   Parker   Festo
Geared Motor & Inverter
 
  SSD AC & DC Drive
 
  Pneumatic, Electrical &
Process Equipment
Mobile :: Sub Masthead

About SEW EURODRIVE

SEW are the leading global specialist in drive technology. For more than 90 years, SEW supply gearmotors, gear units, motors, components for decentralized installation, electronically controlled drives, mechanical variable-speed gearmotors, as well as drive solutions that involve a lot of engineering.
 
Download Brochure
 
 

Power Transmission Geared Motor

Power Transmission Geared Motor
 

Power Transmission Geared Motor

Motors
W
Type
R
Type
S
Type
F
Type
K
Type

Motors

AC Squirrel-Cage Motors
SEW AC squirrel-cage motors are available in frame sizes 56-280 with optional integrated DC operated fail-safe disc brake.
Motors

Solid Shaft Units

IEC foot mounting motor with/without brake
 
DS/CM Synchronous Servomotors
The reliable and economical servomotors of the DS/CM series. They cover a wide range of stand-still torques from 1 Nm to 68 Nm with peak performance ratings of up to 238 Nm. The servomotors come with a high overload capacity.
Motors

Flange Mounting Units

IEC flange mounting motor with/without brake
 

W Type

Spiroplan Small Geared Motors
The W-Series single-stage Spiroplan generated motors with wear-free gearing and very smooth running. In a compact design with light aluminium housing.
Available as foot-mounted, flange-mounted, solid shaft or hollow shaft-mounted version.
 

R Type

Helical Geared Units
The R type offers the single-stage RX series as well as the two and three-stage R type coxial design with high permissible over-hung loads. Available as foot-mounted or flange-mounted.
 

S Type

Helical-Worm Geared Units
The S type two-stage helical-worm geared units with right angle power transmission flow offer a high reduction ratio in the worm gear stage, extremely low-noise operation and high permissible overhung loads.
Available as foot-mounted, flange-mounted, solid shaft or hollow shaft-mounted versions.
 

F Type

Parallel Helical Geared Units
The F type parallel shaft helical geared units with their particularly slim design, offer high efficiency and high-endurance gearing, for mounting wherever space is restricted.
Available as foot-mounted, flange-mounted, solid shaft or hollow shaft-mounted versions.
 

K Type

Helical-Bevel Geared Units
The K type three-stage helical-bevel-helical geared units with right angle power transmission flow, have high efficiency, high endurance gearing and high permissible overhung loads.
Available as foot-mounted, flange-mounted, solid shaft or hollow shaft-mounted versions.
 
 

Inverter

Inverter
 

Inverter

Movitrac
Movidrive B Series

Movitrac LTE-B+

Simple Handling with Increased Efficiency
 
  • Integrated operating unit for simple handling
  • Integrated PI controller
  • Integrated emergency mode/fire mode
  • Integrated SEW-EURODRIVE system bus, CANopen and Modbus RTU
  • Pre-configured according to the respective motor
  • Integrated EMC filter and removable help card
  • Energy saving function
  • Extra quiet pulsing up to 16 kHz
  • V/f and LVFC motor control (Light Vector Flux Control)
  • Operation of synchronous motors with LSPM technology (Line Start Permanent Magnet Motor)
  • Approved in accordance with UL508
  • Also available with IP66/NEMA
 

Movitrac LTP-B

All-Rounder with Safety Integration
 
  • Operation of asynchronous and synchronous motors
  • Keypad for easy startup
  • Integrated EMC filter for 230 V and 400 V
  • "Safe Torque Off" safety function (STO) according to EN ISO 13849-1 PL d
  • Integrated PID controller, energy-saving function
  • Overload capacity up to 175%
  • Motor control modes: V/f, VFC, VFC-torque

Movidrive B Series

Drive Inverters for Positioning & Sequence Control
 
  • One inverter-suitable for a wide range of applications; For asynchronous AC drivers or synchronous servo drives
  • Now covering power range from 0.55 to 160kW
  • Expanded basic functions through more inputs and outputs in the drive inverter
  • Modular unit concept: Optional communication and application components expand the basic function
  • Integrated "safe stop" safety function according to EN 954-1, category 3
  • Plug-in service module for simple and fast transfer of unit data for servicing purpose
  • Keypad with full matrix display and nine selectable languages
  • Jerk-limited acceleration for protecting systems prone to vibrations
  • MOVITOOLS operating software for easy startup and diagnostics
  • PROFIBUS, DeviceNet, ETHERNET MODBUS TCP, INTERBUS fieldbus interfaces
  • Expanded IPOS positioning and sequence control system functions
 

Others

Others
 

Others

We provide solution on brand new and original SEW EURODRIVE components and spare parts.
 
  • Urgent service and repair
  • Access to obsoleted products
  • Sources from SEW assembly plant in SEW Johor Bahru
Desktop View | Mobile View
Copyright © 2023 Ototrans Marketing Sdn Bhd | SEW Distributor & Festo Distributor Johor Bahru (JB), Malaysia
Google Site Search